In 2017 model line LCAC DC-inverter Midea, successfully passed the test for compliance with a number of technical parameters, according to Eurovent standards.
Built-in drain pump
The drain pump can lift the condensing water up to 750mm.
Compresor DC inverter
Compressor with inverter DC can increase the efficiency of the air conditioner, thus reducing power consumption saves your costs. This system is much more economical and safer than air conditioners with a constant output of the compressor.
Working at full capacity compressor inverter air conditioner quickly sets the desired temperature in the room. Then the output is adjusted depending on the ambient (outdoor) temperature and temperature changes inside the building. Thus, the predetermined temperature is maintained with high accuracy. Compressor when approaching a given temprerature gradually reduces the power and its achievements, continues to operate at minimum speed (power) and if there are no large heat leakage, to save power off after 5 minutes.
Non-inverter air conditioner compressors can not change its performance (frequency of rotation of the rotor revolutions of the engine, and consequently, and power) and work to maintain the desired temperature cycles, with alternating cycles of inclusion – off that can not provide high accuracy and “smooth” temperature control, and also adversely affect the living resources of the compressor.
Modern electronic technology and market development of semiconductor components enabled the control inverter compressor control processors, which form the most “smooth” curves current and power, optimize “Unwrap” the control pulses in such a way as to minimize power consumption and “smooth” transition moments.
Mode is activated with the remote control and provides a comfortable environment for a peaceful and deep sleep during the 7-hour cycle with a temperature change of reference values, as well as setting the minimum noise level and economical energy consumption. After that, the temperature returns to the originally specified value.
Redirecting the flow of air to neighboring rooms using air ducts
With the help of air ducts, it is possible to organize the redirection of part of the treated air flow to neighboring rooms.
Dry mode automatically selects cooling, based on the difference between fixed and temparaturoy actual room temperature. The temperature is regulated while reducing humidity repeated switching on and off of the cooling and ventilation only. when the dry mode on the remote control shows “Drop”